Volvo S90 Owner's Manual page 272

KEY, LOCKS AND ALARM
Activating and deactivating private
locking
Private locking is activated with a function button
in the centre display and an optional PIN code.
NOTE
The car needs to be in ignition mode I as a
minimum for the private locking function to be
activated.
Private locking has two codes:
A security code is created the first time the
•
function is used.
A new PIN code is selected every time the
•
function is activated.
Enter the security code before using for
the first time
A security code needs to be selected during the
first time the function is used. It can then be used
to deactivate private locking if the selected PIN
code has been forgotten or lost. The security
code acts as a PUK code for all subsequent PIN
codes set for the private locking function.
Save the security code in a safe place.
270
To create a security code:
1. Press the button for private locking in the
function view.
> A pop-up window is shown.
2. Enter the preferred security code and press
Confirm
.
> The security code is saved. The private
locking function is now ready for activa-
tion.
Activate private locking
NOTE
When private locking is activated, the rear
seat must be in upright position for locking to
work.
1. Press the button for private locking in the
function view.
> A pop-up window is shown.
2. Enter the code to be used in order to unlock
the boot lid and rear seat after locking and
tap on Confirm .
> The boot lid and rear seat are locked.
Confirmation of locking takes place by
means of a green indicator being shown
by the button in the function view.
Deactivate private locking
1. Press the button for private locking in the
function view.
> A pop-up window is shown.