Volvo S90 Owner's Manual page 167

Reset sequence for pinch
protection
If a problem occurs with the electrical functions
for the electric windows, a reset sequence can
be tested.
Electrically-operated sun blinds* have a reset
sequence that can be tested if necessary.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function must
be reset to work properly. A reset must take
place for pinch protection to work.
If a problem persists, or if it concerns the panor-
amic roof or sunroof, contact a workshop
Reset the power window
1. Start with the window in closed position.
2. Then operate the controls in the manual
position 3 times upwards to closed position.
> The system is initialised automatically.
Reset sun blind*
1. Start with the sun blind retracted.
2. Press the control against retracting mode for
approx. 15 seconds.
> The system is initialised automatically.
An authorised Volvo workshop is recommended.
2
Related information
Pinch protection for windows and sun blinds
•
(p. 164)
Operating power windows (p. 166)
•
• Using the sun blind* (p. 167)
2
.
WINDOWS, GLASS AND MIRRORS
Power windows
The power windows are operated using the con-
trol panels in each respective door. The driver's
door has controls for operating all windows and
also to activate the child safety locks.
Driver's door control panel.
Electric child safety locks* that deactivate the
controls in the rear doors to prevent doors or
windows from being opened from the inside.
Controls for rear windows.
Controls for front windows.
The power windows are equipped with pinch pro-
tection. If any fault arises with the pinch protec-
tion, a reset sequence can be tested.
}}
165
* Option/accessory.