Volvo S90 Owner's Manual page 227

Hide thumbs Also See for S90:
Table of Contents

Advertisement

3. Press
Add timer
.
> A pop-up window is shown.
NOTE
It is not possible to add a time setting if there
already are 8 settings entered for the timer.
Delete a time setting in order to be able to
add a new one.
4. Tap on
Date
to set the time for a single date.
Tap on
Days
to set the time for one or more
days of the week.
Days
With
: Activate/deactivate repetition by
ticking/unticking the box for
weekly
.
5. With
Date
: Select the date for precondition-
ing by scrolling the date list with the arrows.
With
Days
: Select the days of the week for
preconditioning by tapping on the buttons for
the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
7. Tap on
Confirm
in order to add the time set-
ting.
> The time setting is added to the list and is
activated.
WARNING
Do not use preconditioning if the car is equip-
ped with a heater*:
In unventilated spaces indoors. Exhaust
gases are emitted if the heater starts.
In locations with combustible or flamma-
ble material nearby. Fuel, gas, long grass,
sawdust, etc. may ignite.
When there is a risk that the heater's
exhaust line may be blocked. For exam-
ple, deep snow inside the front right-hand
wheel housing can obstruct the heater's
ventilation.
Remember that the preconditioning can be
Repeat
started by a timer that has been set for a long
time in advance.
Editing a time setting
1. Open the climate view in the centre display.
2. Select the
3. Press the time setting that is to be changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting" above.
Related information
Preconditioning* (p. 223)
Preconditioning time setting* (p. 224)
Parking climate
tab.
Activating and deactivating time setting for
preconditioning* (p. 226)
Removing time setting for preconditioning*
(p. 226)
CLIMATE
225
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents