Table of Contents
Advertisement
INSTALLATION
2.3.5
Outputs
Two general purpose outputs are available. These outputs can only be connected as
open collector configurations. The following pins are present on the connector of the
scanner:
Pin
Name
8
OUT1+
11
OUT2+
10, 12, 22 I/O REF
The meaning of the two outputs OUT1 and OUT2 can be defined by the user (No
Read, Right or Wrong). Refer to the WinHost Help On Line.
By default, OUT1 is associated with the No Read event, which activates when the
code signaled by the External Trigger is not decoded, and OUT2 is associated with
the Right event, which activates when the code is correctly decoded.
DS2200
V
max = 50 Vdc
CE
I max = 50 mA continuous
These outputs are both level or pulse configurable.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function
output 1 +
output 2 +
I/O reference
USER INTERFACE
Vext 50 Vdc max, 50 mA max.
+
8/11
I/O REF
10/12/22
Figure 9 - DS2200 output connections
2
11
Advertisement
Table of Contents
