Table of Contents
Advertisement
Safety Instructions
1.
Read these safety instructions carefully.
2.
Retain this user manual for future reference.
3.
Disconnect this equipment from all AC outlets before cleaning. Use only a damp
cloth for cleaning. Do not apply liquid or spray detergents.
4.
For plugged-in equipment, the power outlet socket must be located near the
equipment and easily accessible.
5.
Protect this equipment from humidity.
6.
Place this equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7.
The openings of the enclosure are designated for air convection to prevent the
equipment from overheating. DO NOT COVER THESE OPENINGS.
8.
Ensure the power source voltage is correct before connecting the equipment to
a power outlet.
9.
Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If unused for a lengthy duration, disconnect the equipment from the power
source to avoid damage from transient overvoltage.
12.
Never pour liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
14.
If any of the following occurs, have the equipment checked by authorized ser-
vice personnel:
–
The power cord or plug is damaged.
–
Liquid has penetrated into the equipment.
–
The equipment has been exposed to moisture.
–
The equipment is malfunctioning, or does not operate according to the user
manual.
–
The equipment has been dropped and damaged.
–
The equipment shows obvious signs of breakage.
Safety Precautions - Static Electricity
Follow the simple precautions provided below to protect yourself from harm and the
products from damage.
To avoid electrical shock, always disconnect the power from the PC chassis
before manual handling. Do not touch components on the CPU card or other
cards when the PC is powered on.
Disconnect the power before making configuration changes. A sudden rush of
power after connecting a jumper or installing a card can damage sensitive elec-
tronic components.
Packing List
Before beginning card installation, please ensure that the following items have been
shipped:
SOM-4463 B2 module with heat spreader
User manual and drivers
SOM-4463 B2 User Manual
iv
Advertisement
Table of Contents
