Cleaning And Maintenance - Hantek Hantek1025G User Manual

Cleaning and maintenance

Cleaning
I
n order to maintain the cleanliness of equipment, you need to check whether the channels
are dusty or not. Please clean the out surface of the equipment follow these matters.
1. Use velvet cloth contact the surface of the equipment.
2. Pease do not use any corrosive or chemistry.
Caution
Please make sure the equipment is dry enough before going to work. Avoid mangling the
equipment or hurting body because of water!
In order to not mangle the equipment, you should not put it in fog, water or impregnate.
Mainte
nance
Don't put the equipment under the sun for a long time. Put it in wind to the best of one's
abilities
USER'S MANUAL
Hantek1025G
35