Ford Expedition 2020 Owner's Manual page 78

2. With the buttons facing the rear of your
vehicle and the key ring facing upward,
place the first intelligent access key
into the backup slot inside the center
console.
3. Press the push button ignition switch
once and wait for a few seconds.
4. Press the push button ignition switch
again and remove the intelligent access
key from the center console.
5. Insert the second programmed key into
the backup slot in the center console,
then press the push button ignition
switch.
The factory-set code appears in the
information display for a few seconds.
Note: The code may not display until after
any other warning messages first display.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-
Doors and Locks
75