Cruise Control; What Is Cruise Control; Switching Cruise Control On And Off; Setting The Cruise Control Speed - Ford Expedition 2020 Owner's Manual

WHAT IS CRUISE CONTROL

Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal.
Requirements
Use cruise control when the vehicle speed
is greater than 20 mph (30 km/h).
SWITCHING CRUISE CONTROL
ON AND OFF
WARNING: Do not use cruise
control on winding roads, in heavy traffic
or when the road surface is slippery. This
could result in loss of vehicle control,
serious injury or death.
The cruise controls are on the steering
wheel. See Cruise Control (page 89).
Switching Cruise Control On
Press the button.
E265296
Switching Cruise Control Off
Press the button when the
system is in standby mode.
E265297
The system also turns off when you switch
the ignition off.
Note: The set speed erases when you
switch the system off.
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-

Cruise Control

SETTING THE CRUISE
CONTROL SPEED
downhill, your vehicle speed could
increase above the set speed. The
system does not apply the brakes.
Drive to the speed you prefer.
Take your foot off the accelerator pedal.
Note: The indicator changes color in the
information display.
Changing the Set Speed
Press and hold the button to accelerate.
Release the button when you reach your
preferred speed.
Press and hold the button to decelerate.
Release the button when you reach your
preferred speed.
Note: If you accelerate by pressing the
accelerator pedal, the set speed does not
change. When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.
236
WARNING: When you are going
Press either button to set the
current speed.
Press and release the button to
increase the set speed in small
increments.
Press and release the button to
decrease the set speed in small
increments.