Appendix C | Optiflam Tm Combustion Controller (Optional) - Lapierre FUSION X2 User Manual

APPENDIX C
1. WHAT IS OPTIFLAM
OPTIFLAM TM is a computerized combustion control program designed and developed by LAPIERRE
EQUIPMENT. It simplifies the operation of HURRICANE evaporators including the F5 (Force 5), F5 Turbo and
Fusion X 2 .
The OPTIFLAM TM can be used in three modes of operation:
• automatic,
• manual,
• and emergency.
2. WHY IS THE OPTIFLAM
This program is convenient because it:
• controls the start-up cycle to prevent thermal shock,
• keeps the temperature of the combustion chamber constant:
- by continuously adjusting the speed of the combustion air fans,
- by identifying when a reload is needed,
- and/or by informing the user to carry out this reload,
• controls the shutdown cycle,
• detects and warns the operator of certain anomalies,
• keeps a record of the evaporator operating statistics.
3. PROGRAM OPERATING PROCEDURES
The OPTIFLAM TM combustion control program is
operated through a touch screen (Illustration 1) using
four operating displays (Illustrations 3 to 6).
Lapierre Equipment |
TM
OPTIFLAM COMBUSTION CONTROLLER (OPTIONAL)
TM FROM LAPIERRE EQUIPMENT?
TM CONTROL PROGRAM CONVENIENT?
Illustration 1
FUSION X 2 EVAPORATOR
• NAVIGATING BETWEEN OPERATING DISPLAYS
Navigation is done using the two arrows located in
the upper left and right corners of the screen
(Illustration 2).
| USER MANUAL | Version 01 - September 2022
43
combustion controller
Illustration 2