Door Cleaning And Maintenance; Evaporator Cleaning; Cleaning Product Residue On All Components - Lapierre FUSION X2 User Manual

SECTION 6 Equipment maintenance and cleaning (continued)

6.4 DOOR CLEANING AND MAINTENANCE

Below are the instructions for cleaning and maintaining the evaporator door.
Ceramic window
• Cleaning the window from the inside. You may use either of the following two methods:
- a paste designed for the maintenance of ceramic cook tops with a cloth,
- ash with paper towels or a damp cloth.
• Replacing the glass, exterior:
- first unscrew the stainless steel frame,
- remove the insulation joint that holds the glass in place,
- remove the glass and replace it with your new glass,
- replace the new insulation joint in the correct position,
- screw the stainless steel frame back in place.

6.5 EVAPORATOR CLEANING

• The stainless steel components of your equipment must be cleaned with a product specifically designed for
this purpose. Do not use flammable liquids.
• Never use abrasive products, products containing chlorine or muriatic acid (also called hydrochloric acid) to
clean the components of your evaporator.
• The use of wire brushes and steel wool should also be avoided.
During prolonged storage, even the slightest CLEANING PRODUCT RESIDUE ON ALL
COMPONENTS may lead to damage of the equipment. Rinse each cleaned component thoroughly.
Lapierre Equipment |
FUSION X 2 EVAPORATOR
| USER MANUAL | Version 01 - September 2022
23