Table of Contents
Advertisement
SECTION 6 EQUIPMENT MAINTENANCE AND CLEANING
Below are the points to remember for recommended maintenance at the start and end of the season.
6.1
RECOMMENDED MAINTENANCE AT THE START OF THE SEASON
• Remove the pans, inspect the following items and replace as needed:
- the insulation joint between the combustion chamber and the pans,
- the pan divider insulated joints,
- the rear joint where the boiling pan rests,
- the condition of the walls of the combustion chamber,
- the front pusher.
• Inspect the pans for leaks and repair or replace as necessary.
• Inspect the chimney for internal damage and obstructions such as a bird's nest or other foreign objects.
• Replace the insulation joints on the ferrules and connectors.
• Lubricate the sliding joints of the piping with food grade grease.
• Assemble the equipment.
6.2 RECOMMENDED MAINTENANCE AT THE END OF THE SEASON
• Clean pans.
• Make sure the steam vents and chimney are closed properly.
• Remove the pans, inspect the following items and replace as needed:
- the insulation joint between the combustion chamber and the pans,
- the pan divider insulated joints,
- the rear joint where the boiling pan rests,
- the condition of the walls of the combustion chamber,
- the front pusher.
• Inspect the pans for leaks and repair or replace as necessary.
6.3 ANNUAL REPLACEMENT OF PARTS, RECOMMENDATION
We recommend that you replace certain parts of your evaporator every year, especially materials enabling:
• the insulation of the glass and the door,
• the sealing of the door,
• the insulation between the pans and the frame,
• the pan insulation joints.
Lapierre Equipment |
FUSION X
2
EVAPORATOR
| USER MANUAL | Version 01 - September 2022
22
Advertisement
Table of Contents
