Safety Instructions - Lagrange evolution Manual

SAFETY INSTRUCTIONS

Please read this manual carefully
and ensure you keep it for future
reference.
Ensure that the mains voltage
*
corresponds to the voltage that is
shown on the device's indicator
plate.
Fully unwind the cable and carefully
*
examine it before use.
Regularly check the condition of the
*
power cable, and do not use the
device if any damage is detected.
If the power cable is damaged, it must
*
be replaced with a cable or a special
set available from
or its after-sales service.
Place your device on a flat, dry,
*
surface.
Never place the device near a heat
*
source.
Never place your device on a hot
*
surface or near an open flame.
Plug the device's power cord into
*
a 10/16 A socket fitted with an
earthing contact.
If this device is used with an extension
*
cable, it is essential that the cable's
plug has an earthing connection and
that the cross-section of the wiring
is 0.75 mm
Take any precautions that are required
*
to prevent the risk of tripping over
the main cable or extension.
40
or greater.
2