Notes On This Manual - Kessel EasyClean ground Oval NS Series Installation And Operating Instructions Manual

1

Notes on this manual

This document is a translation of the original operating instructions. The original operating instructions are written in German.
All other language versions of these instructions are a translation of the original operating instructions.
The following conventions make it easier to navigate the manual:
Symbol
[1]
(5)
...
Check whether manual operation has been
activated.
Press OK.
System is ready for operation.
see "Safety", page 21
Bold type
Italics
The following symbols are used:
Icon
WARNING
CAUTION
20 / 112
Position number 5 from the adjacent figure
Cross-reference to Chapter 2
Particularly important or safety-relevant information
Variants or additional information (e.g. applicable only for ATEX variants)
Technical information or instructions which must be paid particular attention.
Isolate device!
Observe the instructions for use
Warning, electricity
Warns of a hazard for persons. Disregarding
this warning can lead to very serious injuries or death.
Warns of a hazard for persons and material. Disregarding
this warning can lead to serious injuries and material damage.
Installation and operating instructions
Explanation
See Figure 1
Action step in figure
Prerequisite for action
Action step
Result of action
Meaning
CE marking
016-310