Table of Contents
Advertisement
WARNING
Non-compliance with the product documentation may cause accidents, personal injury or property damage.
▪.
Mounting, installation, commissioning, start-up, operation and maintenance of the device may be
performed by qualified staff only. Such staff must be authorized by the operator of the facility to carry out
the mentioned activities.
▪.
The qualified staff must have read and understood this user manual and must follow the instructions
contained within.
▪.
All process and electrical connections shall be thoroughly checked by authorized staff before putting the
device into operation.
▪.
Do not install or start-up a device supposed to be faulty. Make sure that such devices are not accidentally
used by marking them clearly as faulty.
▪.
A faulty device may only be investigated and possibly repaired by qualified, trained and authorized staff. If
the fault cannot be fixed, the device shall be removed from the process.
▪.
Service operations other than described in this user manual may only be performed by the manufacturer.
1.3
Environmental Aspects
PLEASE NOTE
Products from E+E Elektronik Ges.m.b.H. are developed and manufactured in compliance with all relevant
environmental protection requirements. Please observe local regulations for the disposal of the device.
For disposal, the individual components of the device must be separated according to local recycling
regulations. The electronics shall be disposed of correctly as electronics waste.
1.4
ESD Protection
The sensing elements and the electronics board are ESD (electrostatic discharge) sensitive components
of the device and must be handled as such. Failure to do so may damage the device by electrostatic
discharge when touching exposed sensitive components.
2 Scope of Supply
HTS801 according to ordering guide
Manual HTS801
Inspection certificate according to
DIN EN 10204-3.1
Mating plug for integrated power supply
Mating.plug.RKC.5/7
Mating.plug.RSC.5/7
Mating plug HPP V4 RJ45 Cat5
M16 cable gland
Cut-in fitting
Included in all versions
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 7
User Manual HTS801
With option
AM3
AM3./.E4./.E6
E6
J4
Except.for.Options.E4./.E6./.AM3
HTS801-M1T9
Advertisement
Table of Contents
