Table of Contents
Advertisement
7.5
F use Replacement for Integrated Power Supply 100 - 240 V AC
(Option AM3)
WARNING
The AM3 option includes a 1.25 A fuse on the 100 - 240 V side. This fuse may not be replaced by the user,
only by the E+E after sales service.
The protection of the supply cable against excess current and short-circuit must be designated to a wire
cross section of 0.8 mm
WARNING
There is the risk of electrict stroke and subsequential serous injury or death.
▪.
The metal enclosure must be grounded during operation.
▪.
All national regulations for installation shall be observed!
8 Spare Parts / Accessories
Description
E+E Product Configuration Software
(Free download: www.epluse.com/pcs10)
USB cable for PC connection (USB-A to USB-C)
Stainless steel mounting flange Ø12 mm (0.47")
Stainless steel mounting flange for Ø6 mm (0.24") T probe
Stainless steel wall mounting clip Ø12 mm (0.47")
Pressure-tight feedthrough
Humidity calibration kit
Conduit adapter M16x1.5 to NPT 1/2"
Drip water protection
Radiation shield with artificial ventilation for HTS801-M1T28
Radiation shield for RH probe
Radiation shield for T probe
Bracket for DIN rail mounting
Wall Mounting Clip Ø12 mm (0.47")
Ethernet module for retrofitting, polycarbonate enclosure only
Immersion well, stainless steel Ø6x135 mm (0.25 x 5.4")
1) For polycarbonate enclosure only. Two pieces are necessary for each HTS801
2
(AWG 18) (6A fuse).
G1/2" ISO Ø12 mm
1/2" NPT Ø12 mm
G1/2" ISO Ø6 mm
1/2" NPT Ø6 mm
1)
1/2" ISO
1/2" NPT
Code
PCS10
HA010327
HA010201
HA010207
HA010225
HA011102
HA011103
HA011104
HA011105
see
Humidity Calibration Kit
HA011101
HA010503
HA010508
HA010502
HA010506
HA010203
HA010211
HA010606
HA400202
HA400212
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 50
User Manual HTS801
data sheet
Advertisement
Table of Contents
