Remote Sensing Probe Type T5; Remote Sensing Probe Type T7; Installation At Normal Pressure - E+E Elektronik HTS801 User Manual

4.3 Remote Sensing Probe Type T5
For mounting the probe into a separation wall use the stainless steel mounting flange. The immersion depth is
adjustable. The probe shall be mounted horizontally.
Values in mm (inch)
Probe into seperation wall
Temperature gradient along
the probe shall be avoided
Temperature gradient along
Probe into separation wall
the probe shall be avoided
Probe into separation wall
Fig. 28 Mounting the remote probe of HTS801-T5
The stainless steel mounting flange is not appropriate for pressure-tight mounting. For pressure-tight
requirements use HTS801-T10.
4.4 Remote Sensing Probe Type T7
4.4.1.

Installation at normal pressure

For mounting the probe into a separation wall use the stainless steel mounting flange. The immersion depth is
adjustable. The probe shall be mounted horizontally.
Values in mm (inch)
Probe into seperation wall
Temperature gradient along
the probe shall be avoided
Temperature gradient along
Probe into separation wall
the probe shall be avoided
Probe into separation wall
Fig. 29 Mounting the remote probe of HTS801-T7
Stainless steel
mounting flange
HA010201
Stainless steel
mounting flange
HA010201
Bow for draining
condense water
Bow for draining
condense water
Stainless steel
mounting flange
HA010201
Stainless steel
mounting flange
HA010201
Bow for draining
condense water
Bow for draining
condense water
Hanging probe
Sealing
Drip water
protection
HA010503
Drip water
protection
HA010503
Hanging probe
Hanging probe
Hanging probe
Sealing
Drip water
protection
HA010503
Drip water
protection
HA010503
Hanging probe
Hanging probe
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 25
User Manual HTS801
Sealing
85
(3.3)
85
(3.3)
Sealing
85
(3.3)
85
(3.3)