Table of Contents
Advertisement
CONFIGURATION HINT
Display alarms can be configured via display and push-buttons only. Configuration is to be done in the
"Display settings" menu.
The.HTS801.display.also.includes.a.data.logger.with.a.storage.capacity.of.20 000.values.per.measurand.or.
calculated quantity.
During the first 5 seconds after display start-up, the data logger and the configuration menu are initialized.
Fig. 10
Control panel with display and push-buttons
Data Logging
The TFT display with the integrated data logging function saves all measured and calculated values to the internal
memory. The data logger has a real time clock (UTC time) with a battery back-up.
NOTICE
Changing the UTC time erases all stored data.
The.data.logger.can.save.20 000.values.for.each.measurand..The.logging.interval.is.user.configurable.from.1.
second to 12 hours. The data logging menu is also used to select the data points that make up the graph and for
scaling, see chapter 11.2, Fig. 48 Data logging.
Axis 1 value
(cursor position)
Axis 1
Date
(cursor position)
Fig. 11
Data logging
Axis 2 value
(cursor position)
4
Cursor
Axis 2
Time
(cursor position)
1
Chart + data logger
2
Configuration menu
Status information
3
Buzzer ON / OFF
4
5
Error indication / information
1
Home button
2
Configuration incl. data logger menu
3
Time scale for the graph (5 min - 3 months)
Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 14
User Manual HTS801
Advertisement
Table of Contents
