FSR SN-4100 Operation Manual

FSR SN-4100 Operation Manual

Vga switcher

Advertisement

Quick Links

REGULATORY COMPLIANCE

FSR'S ELECTRONIC PRODUCTS have been tested for compliance with: FCC Class A
and CE The Power Adapter has been tested for compliance with: UL, CSA and CE.
FSR

WARRANTY POLICY

This product is warranted against failures due to defective parts or faulty workmanship for
a period of one year after delivery to the original owner. During this period, FSR will make
any necessary repairs or replace the unit without charge for parts or labor. Shipping charges
to the factory or repair station must be prepaid by the owner, return-shipping charges, via
UPS / FedEx ground, will be paid by FSR.
SN - 4100A
This warranty applies only to the original owner and is not transferable. In addition, it does
not apply to repairs done by other than the FSR factory or Authorized Repair Stations.
VGA
This warranty shall be cancelable by FSR at its sole discretion if the unit has been
subjected to physical abuse or has been modified in any way without written authorization
from FSR. FSR's liability under this warranty is limited to repair or replacement of the
SWITCHER
defective unit.
FSR will not be responsible for incidental or consequential damages resulting from the use
or misuse of its products. Some states do not allow the exclusion of incidental or conse-
quential damages, so the above limitations may not apply to you. This warranty gives you
FOUR BY ONE AUDIO/VIDEO SWITCHER
specific legal rights, and you may also have other rights which vary from state to state.
Warranty claims should be accompanied by a copy of the original purchase invoice
showing the purchase date (if a Warranty Registration Card was mailed in at the time of
OPERATIONS MANUAL
purchase, this is not necessary). Before returning any equipment for repair, please read the
important information on service below.

SERVICE

Before returning any equipment for repair, please be sure that it is adequately packed and
cushioned against damage in shipment, and that it is insured. We suggest that you save
the original packaging and use it to ship the product for servicing. Also, please enclose a
note giving your name, address, phone number and a description of the problem.
NOTE: all equipment being returned for repair must have a Return Authorization
(RMA) Number. To get a RMA Number, please call the
FSR Service Department (973-785-4347).
Please display your RMA Number prominently on the front of all packages.
Contact Information:
244 Bergen Boulevard,
West Paterson, NJ 07424
244 Bergen Boulevard, West Paterson, NJ 07424
Tel: (973) 785-4347 · Fax: (973) 785-4207
Tel: (973) 785-4347 · Fax: (973) 785-4207
E-Mail: sales@fsrinc.com
Web:
http://www.fsrinc.com
E-Mail: sales@fsrinc.com · Web:
http://www.fsrinc.com
issue date: 1-03
LIT1010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN-4100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FSR SN-4100

  • Page 1 This product is warranted against failures due to defective parts or faulty workmanship for a period of one year after delivery to the original owner. During this period, FSR will make any necessary repairs or replace the unit without charge for parts or labor. Shipping charges to the factory or repair station must be prepaid by the owner, return-shipping charges, via UPS / FedEx ground, will be paid by FSR.
  • Page 2 SYNC INPUTS All information in this manual is proprietary to and the Impedance: 470 ohms property of FSR inc. This publication is protected by the Federal Type: TTL high noise immunity Copyright Law, with all rights reserved. No part Level: 1.9 volt minimum...
  • Page 3 Stereo separation: -85 dB @ 1kHz Gain INTRODUCTION The SN-4100 series switcher is a 4 input to 1 output high AUDIO INPUTS resolution VGA switcher. The ‘A’ models include bal-anced Number / type: 4 stereo balanced (may be used with unbalanced stereo audio switching with audio following video.
  • Page 4 INSTALLATION Connect each of the video sources to video inputs 1through 4. Connect each of the audio sources to audio inputs 1 through 4. (See diagrams) Use the diagrams on the following page for “mono” or unbalanced audio sources. Connect the input from a control source to the remote input. (If used) Use the chart on the following page for the remote control pinout.

Table of Contents