Rs-232 Com Port Configuration; Rs-232 Settings; Ethernet To Rs-232 Redirector - DEVA Broadcast DB9000-RX Maintenance And Operation Instruction Manual

Professional ip audio decoder with stereo & rds encoder module

Hide thumbs Also See for DB9000-RX:

Table of Contents

RS-232 COM PORT CONFIGURATION

DB9000-RX also acts as Ethernet to RS-232 redirector. You can connect any RS-232 compatible

equipment to DB9000-RX and communicate with it over the Internet.

Mode – Specifies RS-232 port mode. By default, the option is set to RS-232 Redirector.

Baud rate – Select baud rate of the RS-232 COM Port. The external equipment must be

configured to the same baud rate. Default value is 9600.

Port – specify TCP port of the Ethernet to RS-232 redirector. This is the TCP port used to

communicate with any external device connected to the RS-232 COM Port. The default value is

8001.

Password – Password for the RS-232 server. These are the first symbols that must be sent to

authenticate to the Ethernet to RS-232 redirector, otherwise the connection is dropped. If left

blank, NO security is used. The default value is blank (empty).

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 36 -

Table of Contents