Connecting Of Db90-Tx; Analog Audio Inputs; Digital Audio Input; Lan Port - DEVA Broadcast DB9000-TX Maintenance And Operation Instruction Manual

Professional ip audio encoder

Hide thumbs Also See for DB9000-TX:

Table of Contents

Using a cable ending with two standard XLR connectors connect the analog signal source to the

analog audio inputs of DB9000-TX.

WARNING:

Do not exceed maximum input level. This may permanently damage the device.

Using a cable ending with a standard XLR connectors connect the AES/EBU signal source to

the digital audio input of DB9000-TX.

NOTE:

As only one input can be managed by the encoder at certain point of time, please select

the preferred signal source input – either analog or digital one. Selecting the preferred input can be

performed under CONFIGURATION menu (see "Audio Settings" on page 19).

For normal operation it is necessary the encoder to be connected to a local network or Internet

by cable with RJ-45 connector.

Using standart DB-9 cable connect DB9000-TX to any RS-232 compatible equipment.

Connecting of DB90-TX

- 13 -

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56/820027, Fax: +359 56/836700

E-mail: office@devabroadcast.com

Web: www.devabroadcast.com

Table of Contents