Connecting Of Db90-Tx; Analog Audio Inputs; Digital Audio Input; Lan Port - DEVA Broadcast DB90TX Maintenance And Operation Instruction Manual

Ip audio encoder

Hide thumbs Also See for DB90TX:

Table of Contents

Using a cable ending with two standard RCA jacks connect the analog signal source to the

analog audio inputs of DB90-TX.

WARNING:

Do not exceed maximum input level. This may permanently damage the device.

Using a cable ending with a standard RCA jacks connect the S/PDIF signal source to the digital

audio input of DB90-TX.

NOTE:

As only one input can be managed by the encoder at certain point of time, please select

the preferred signal source input – either analog or digital one. Selecting the preferred input can be

performed under CONFIGURATION menu (see "Audio Settings" on page 19)

For normal operation it is necessary the encoder to be connected to a local network or Internet

by cable with RJ-45 connector.

Connecting of DB90-TX

- 12 -

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

Table of Contents