DEVA Broadcast DB9000-TX Quick User Manual

Professional ip audio encoder

Hide thumbs Also See for DB9000-TX:

65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria

Tel.: +359 56 820027, Fax: +359 56 836700

Email: office@devabroadcast.com, Web: www.devabroadcast.com

Quick User Guide

DB9000-TX

Professional IP Audio Encoder

BEFORE YOU USE THIS PRODUCT

In order to be able to enjoy all the benefits of owning your new

DEVA product, please verify first that the latest software and

firmware release were installed.

Visit www.devabroadcast.com/downloads for the most

recent software and firmware downloads, prior the installation.

DEVA Broadcast Limited is an ISO 9001:2015 certified company.

Table of Contents

Need help?

Do you have a question about the DB9000-TX and is the answer not in the manual?

Page 1 In order to be able to enjoy all the benefits of owning your new DEVA product, please verify first that the latest software and firmware release were installed. Visit www.devabroadcast.com/downloads for the most recent software and firmware downloads, prior the installation. DEVA Broadcast Limited is an ISO 9001:2015 certified company.
Page 2 Configuration STEP 2 DB9000-TX is controlled trough a build in WEB Server and a standard web browser can be used to monitor its status or to make some adjustments. To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it through the headphones when you turn on the the device.
Page 3 - IP Address, Netmask, Gateway, Primary and Secondary DNS. Otherwise, enable the DHCP. Web Server Settings In order to enhance the security of DB9000-TX you can set new Username and Password. In case a dialog box appear, fill in the NEW username and password requested.
Page 4 Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET button held until the PWR led starts blinking. Release the RESET button and wait for DB9000-TX to reboot with the factory default settings.