Rds Encoder Configuration; Rds Encoder Settings; Program Station Name Settings - DEVA Broadcast DB9000-RX Maintenance And Operation Instruction Manual

RDS ENCODER CONFIGURATION

RDS Encoder Settings

Enable – General Enable or Disable RDS Encoder.

Program Station Name Settings

PS Static – The 8-character PS field is for the "street name" of the station. This will appear on
the radio faceplate whenever a dynamic, scrolling – PS message is not being transmitted.
PS Dynamic – We provide Dynamic PS in block mode because of our concern over distracted
car drivers. Viewing a message in the block mode (complete words or groups of words), a driver
must pay close attention to the radio display, or risk missing part of the message. Although the
message may be repeated over and over, the driver may tune in at the end of a song, and in finding
out who sang the number could rear-end the car in front.
Dynamic PS 'marches' the message across the display screen one character at a time. The
message requires a much longer transmission time in this mode, but a glance at the radio display a
few seconds still allows the driver to get the full message without missing words.
DPS Scroll Step – DPS Scroll Step is used in the "block" mode of message transmission,
the more popular 'grouped-word' method. Once 'DPS Scroll Step' options are set, this encoder
function is valid for any scrolling-PS message, whether it is entered into the static DPS register,
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 41 -