Basic Setup; Analog Audio Inputs; Digital Audio Inputs; Lan Port - DEVA Broadcast DB91-TX Maintenance And Operation Instruction Manual

Compact ip audio encoder

Hide thumbs Also See for DB91-TX:

Table of Contents

Using a cable ending with two standard RCA jacks connect DB91-TX analog signal outputs to

the analog audio inputs of your equipment.

WARNING:

Do not exceed maximum input level. This may permanently damage the device.

Using a cable ending with a standard RCA jacks connect the S/PDIF signal source to the digital

audio input of DB91-TX.

NOTE:

As only one input can be managed by the encoder at certain point of time, please select

the preferred signal source input – either analog or digital one. Selecting the preferred input can be

performed under CONFIGURATION menu

For normal operation it is necessary the device to be connected to a local network or Internet

by cable with RJ-45 connector.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

Basic Setup

(see "Input" on page

- 15 -

Tel: +359 56 820027, Fax: +359 56 836700

19).

Table of Contents