ANALOG AUDIO INPUTS
Using a cable ending with two standard XLR connectors connect the analog signal source to the
analog audio inputs of DB9000-TX.
WARNING:
Do not exceed maximum input level. This may permanently damage DB9000-TX.
DIGITAL AUDIO INPUT
Using a cable ending with a standard XLR connectors connect the AES/EBU signal source to
the digital audio input of DB9000-TX.
NOTE:
As only one input can be managed by the encoder at a time, please select the preferred
signal source input – either analog or digital one. Selecting the preferred input can be performed
under CONFIGURATION menu
LAN PORT
To ensure normal operation of the DB9000-TX, its is necessary the device toto be connected to
a local network or Internet by cable with RJ-45 connector.
RS-232 COM PORT
Using standart DB-9 cable connect DB9000-TX to any RS-232 compatible equipment.
Connecting of DB9000-TX
(see "Audio Settings" on page
- 22 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
29).