Ip Audio Configuration - DEVA Broadcast DB9000-RX Maintenance And Operation Instruction Manual

IP AUDIO CONFIGURATION

Through this screen are applied all needed settings to the alternative sources. The backup
sources priority is user-defined and can be set through the relevant section. If the audio from the
main source disappears, the DB9000-RX will automatically switch to the first backup source; if it
also fails, the unit will switch to the second. Once a source with higher priority is restored, the unit
will switch back to it.
Source Priority – allows the Main and Backup Sources Priority to be specified. The following
options are available: IP Audio Player, Icecast Player, RTP Player, MP3 Audio Player.
IMPORTANT NOTE:
DB9000-RX should have static IP Address. If the device is placed behind a router, you will have
to make sure that the player port is properly NAT forwarded.
RTP Audio Player – Specify the audio player port and decoder to be used. Ext. header is a
setting used in manual mode for compatibility with some RTP senders. It specifies whether RTP
Extension header is present in the stream. By default, the setting is set to Auto.
Icecast Audio Player – Specify the audio player port, username, password and decoder to be
used.
IP Audio Client 1, IP Audio Client 2 and IP Audio Client 3
URL of the Server – The URL is a mandatory requisite needed in order for a connection with
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
When used as RTP Audio Player and Icecast Audio Player, the
- 31 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700