Quick Reference - DSC neo HS128 E User Manual

Chapter 1.0 Quick Reference

1.0 Quick Reference

The PowerSeries Neo Alarm System uses shortcut keys to access options or features on all models
of keypads. When using an LCD keypad, the PowerSeries Neo Alarm System additionally uses a
menu based navigation system. The scroll keys can be used to [Scroll] through the list of options con-
tained within the current menu. For more information on keypads see: 2.0 "Understanding your
Keypad". Lookup detailed information on any of the listed actions using the accompanying Section
number.
For detailed information about the PowerSeries Neo Alarm System, refer to the full online manual,
which can be accessed from the DSC.com Web site.
Note: Some features must be enabled by installer.
Note: Bypass Groups are not permitted in UL listed installations.
Note: [*] - If configured by installer.
Status
Function Keys
Lights
Ready - Indicates system normal. Must
be on to set system. All zones must be
secured or bypassed and the system unset
for this light to activate.
Set- Indicates system is set. If the Ready
light and the Set light are both on, an
Exit Delay is in progress.
Trouble - On indicates a system mal-
function or tamper. Flashing indicates
that the keypad has a low battery con-
dition. Follow the instructions displayed
or enter [*][2] to view trouble. Cor-
recting the trouble turns off the indic-
ator.
AC Power - Indicates AC Power is
present. The AC Power light will turn
off when AC is absent.
Action
Setting and Unsetting
Away Set
Stay Set
Night Set
No-Entry Setting
Quick Set/Quick Exit
Abort Setting Sequence
Bypassing - All bypass commands begin with [*][1] + [Access Code*]
Function
Keys
Press
for 2 seconds + [Access Code*]
for 2 seconds + [Access Code*]
When set in stay mode [*][1] + [Access Code*]
[*][9] + [Access Code*]
[*][0]
[Access Code]
- 3 -
Status Emergency
Lights Keys
Stay
Set
Away
Set
Chime
Reset
Sensors
Quick
Exit
Emergency
Keys
Fire Alarm
Medical
Alarm
Panic Alarm