Chapter 2.0 General system operation
Cellular Signal Strength
Status LED
Indication
ON ( green)
ON (amber)
ON (red)
Flashing ( amber)
OFF
Remote Connection Status
Status LED
Indication
ON ( green)
Flashing (red)
Flashing ( amber)
OFF
Note: If the Remote Connection status LED flashes red, the server may be undergoing main-
tenance or experiencing technical difficulties. Restarting the panel may remedy the issue. If the
problem persists, contact your installer.
2.3 Integrated keypad quick reference
Use the following table for quick reference of the integrated keypad options:
Action
Away arm
Stay arm
Disarm
Abort arming s equence
System troubles
Silence troubles
View troubles
1
For UL listed installations, you must enter your access code to silence trouble beeps and view sys-
tem troubles.
2.4 Wireless LCD keypad
The iotega system supports the following keypad model:
WS9LCDWFx
Description
Cellular is active with a strong s ignal connection.
Cellular is active with a weak s ignal connection.
A communicator is installed but there is no signal or
connection
System Test
All status LEDs flash at the same time.
A communicator is not installed or not configured.
Description
The link is active with a server.
The link activates but fails to c ommunicate with the
server.
System Test
All status LEDs flash at the same time.
The link is not yet active with a ny server.
Enter
[Access Code]
[Access Code]
[Access Code]
[Access Code]
[Any key] or [*][2] + [Access code
[*][2] + [Access code
Wireless Alphanumeric LCD keypad
- 8 -
1
]
1
] + [Trouble code]