Quickdisc Does Not Recognize The Rimage 360I - Rimage 360i Manual

Rimage 360i™ Knowledge Base

QuickDisc does not recognize the Rimage 360i.

This may be a problem with the printer, autoloader, or recorder. (link to printer, autoloader, and
recorder processes here. Select the appropriate section to view solutions.
Printer
Important! Try these solutions in the order they are presented.
•
Ensure that the Rimage 360i is powered on.
•
Ensure that the USB cable is firmly connected to the computer and the autoloader.
•
Ensure that the ink cartridges are installed and latches are closed.
•
Ensure that the protective tape is removed from the ink cartridges.
•
Ensure that the installation was completed properly.
July 31, 2007 ©Rimage 2007
16