The Print Is "Off" Color Or Is Printing "Faint - Rimage 360i Manual

Rimage 360i™ Knowledge Base
4. Select the Mask Settings tab.
5. Make your changes to the inner and outer hub diameter under the Standard Area
settings.
Note: If your discs have a stacking ring
need to m ake changes to the hub area setting appropriately.
6. Select OK.
7. Close the Printer wind
8. Save the label file.
9. Print the label again.
Note: If that doesn't work, reinstall the printer driver. Link to that process

The print is "off" color or is printing "faint."

R eplace the ink cartridges. Refer to the Maintain the Rimage 360i section of the Rimage 360i
Printer User Guide.
July 31, 2007
(raised area on the disc for stacking), you will
ow.
©Rimage 2007
10