The Print Is Grainy; The Print Is Not Masking Or Prints On The Hub - Rimage 360i Manual

Rimage 360i™ Knowledge Base
•
Install a hard drive that meets the following optimum computer specifications.

The print is grainy.

Important! Try these solutions in the order they are presented.
Be sure you are usin g Rimage media. Rimage offers media kits that provide superior
performance and exceptional convenience at a competitive price. For more information, see
Rimage Media Kits.
•
Replace the ink cartridges. Refer to the Maintain the Rimage 360i section of the Rimage 360i
Printer User Guide.

The print is not masking or prints on the hub.

Important! Try these solutions in the order they are pre
•
Follow these steps to adjust the mask settings:
Prin ting labels from CD Designer
Note: If using CD Designer, printing pre
used instead of the printer driver settin
1. Open the label file with CD Designer.
2. Select Print. The Printer window
3. Select the Document Properties button.
4. Select the Mask Settings tab.
5. Make your changes to the inner and outer hub diameter under the Standard Area
settings.
Note: If your discs have a stacking ring (raised area on the disc for stacking), you will
need to make changes to th
6. Select OK.
7. Close the Printer wind
8 . Save the label file.
9. Print the label ag
Printing PDF files
Wh en rinting with .PDF files, change the Printing Defaul p
1. From the Windows Start menu:
Navigate: Settings > Printers in Wind
Navigate: Settings > Printers and Faxes in Windows XP.
2. Right-click on Disc Color Prin
3. From the dropdown menu, select
Preferences window opens.
July 31, 2007
ferences are saved with the label file and are
opens.
e hub area setting appropriately.
ow.
ain.
ter 480i.
Preferences. The Disc Color Printer 480i Printing
©Rimage 2007
sented.
gs.
ts in the printer driver.
ows 2000.
9