Projecta INVCHRD-BT Quick Start Manual page 5

CONFIGURATION
Step 1. To enter into the configuration: Press
scroll down/confirm button for 2 seconds.
Step 3. Long press the scroll down/confirm button
for 2 seconds to trigger on the configuration, the
number/icon will flash.
Step 5. Afterwards, long press the scroll down/
confirm button for 2 seconds to confirm the
configuration. The two bars (load ratio and
battery soc) will flash indicating the configuration
is in process.
Step 2. Then you can use scroll up or scroll down
button to choose the parameter you want to change.
Step 4. Use scroll up or scroll down button to change
the value.
Step 6. After you have done all configuration you
need, please press scroll up/return button for 2
seconds to exist configuration.
5