Leckey MyWay+ Instructions For Use Manual page 42

p.42 MyWay+ User Manual
• To adjust the sliders,
slacken the ankle guide
cord by loosening the knob
at the end of the frame
tube ; unclip the sliders
and move them to the
desired positions ; clip
the sliders over the ankle
guide cord and re-tighten
using the knob at the end
of the frame tube.
• Repeat steps above with
the other ankle guide and
pad.
• To detach the ankle guides,
release the ankle guide
pad from around the user
and loosen the knob
at the end of the frame
tube to pull the screw out
through the hole.
the ankle guide from the
crevice between the front
castor and frame tube.
Repeat with the other pad
and ankle guide.
Warning – be aware of finger placement when attaching/detaching
the ankle guides to avoid potential for finger nipping.
Unloop