Leckey MyWay+ Instructions For Use Manual page 34

11.3 Complex Head Rest
• To attach the head support, flip
up the rubber cap
on the top of the upper support
unit to expose the headrest
receiver slot
• Insert the headrest attachment
pole into the receiver slot
, ensure silver headrest
attachment pole curves away
from the user. Loosen the
thumb screws and rotate
the headrest backwards. Turn
the attachment screw
clockwise direction. Check the
headrest is secure. Rotate the
headrest forward and tighten
the thumb screws
• Use lateral screws
head support laterals. It is
necessary to open the zip on
the cover to access screws
It is recommended to loosen
both the screw and the
thumb screws to position the
headrest. When the headrest
is at the desired position then
tighten screw and thumb
screws .
• To remove the headrest loosen
the thumb screws
headrest backwards to allow
access to attachment screw
. Turn the attachment screw
anticlockwise and lift the
headrest up out of the receiver
slot .
situated
in a
.
to adjust
.
rotate the
MyWay+ User Manual p.34