Stopping Ssa Notification Of A Single Site By Manual Entry; Stopping Ssa Notification Of All Sites - Motorola APX 2000 User Manual

7.28.6

Stopping SSA Notification of a Single Site by Manual Entry

Procedure:
1 or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [SiteID Entry] and press the Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu Select button directly below Send.
One of the following scenarios occur:
• If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site
ID again.
• If a correct Site ID is entered, the display shows Sending req.
• If the request is successful, the display shows Req successful.
• If the single site is not available, the display shows <Site ID> not available.
• If the single site does not exist, the display shows <Site ID> does not exist.
6 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for the designated site stops.
7.28.7

Stopping SSA Notification of All Sites

Procedure:
1 or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [All Sites] and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
If one or more sites are not available, the display shows Not all sites available. Repeat
step 3.
68012005014-HV
Chapter 7 : Advanced Features
125