Saving A Channel In The Dynamic Zone From List Selection; Saving A Channel In The Dynamic Zone From Channel Name - Motorola APX 2000 User Manual

3 Perform one of the following actions:
• Press the Menu Select button below Sel to select.
• Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels> shown on the screen.
If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns
to Home screen without any changes.
7.1.6.2

Saving a Channel in the Dynamic Zone from List Selection

Prerequisites: To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1 or to ZnPr. Press the Menu Select button directly below ZnPr to enter the Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3 or to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4 or to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
5 or to the required channel. Press the Menu Select button directly below Sel .
The display shows Channel updated.
6 Press the Menu Select button directly below Exit to return to Home screen.
7.1.6.3

Saving a Channel in the Dynamic Zone from Channel Name

Prerequisites: The radio must be in Dynamic Zone in order to perform this operation.
Procedure:
1 or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3 or to Channel Name then press the Menu Select button directly below Sel .
The display shows a blinking cursor on the Channel Name screen.
4 Use the keypad to type or edit the channel name.
5 Press the Menu Select button directly below Srch once the entry is done to initiate searching.
68012005014-HV
Chapter 7 : Advanced Features
55