Sending Remote Emergency To Specific Users; Sending Remote Emergency By Entering The User Id - Motorola APX 2000 User Manual
Hide thumbs
Also See for APX 2000:
- User manual (206 pages) ,
- Quick reference manual (47 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
7.10.5.1
Sending Remote Emergency to Specific Users
Procedure:
1 Press the programmed Remote Emergency button.
2 Select the required user of the target radio.
3 To send Remote Emergency, press the PTT button.
If the ID of the target radio is valid, your radio displays sending notification and saves the ID as the last
Remote Emergency ID.
If the ID of the target radio is invalid, your radio displays an invalid ID notification.
If your radio is in one of the following states, your radio plays a tone.
•
Receive-only Channel
•
Transmit Inhibit
•
Out of Range
•
Imbalance Coverage
If your radio receives acknowledgment, your radio displays a positive notification.
If your radio does not receive acknowledgment from the target radio, your radio displays a negative
notification.
7.10.5.2
Sending Remote Emergency by Entering the User ID
Procedure:
1 Press the programmed Remote Emergency button.
2 Press any digit key.
3 Enter the number of the user ID.
4 To send Remote Emergency, press the PTT button.
If the ID of the target radio is valid, your radio displays sending notification and saves the ID as the last
Remote Emergency ID.
If the ID of the target radio is invalid, your radio displays an invalid ID notification.
If your radio is in one of the following states, your radio plays a tone.
•
Receive-only Channel
•
Transmit Inhibit
•
Out of Range
•
Imbalance Coverage
If your radio receives acknowledgment, your radio displays a positive notification.
If your radio does not receive acknowledgment from the target radio, your radio displays a negative
notification.
68012005014-HV
Chapter 7 : Advanced Features
73
Advertisement
Table of Contents
