Sprout SOUNDWAVE Product Manual page 6

4. OPERATING CONTROLS
CONNECTING MULTIPLE SPEAKERS VIA UNISYNC
Using the UNISYNC feature you can connect up to
50 UNISYNC compatible speakers. In this example,
your Soundwave is your primary device.
To connect a replica, short press the UNISYNC
button on your primary speaker once to enter
UNISYNC mode. Once the primary announces it is
in UNISYNC mode, repeat on the replica. After the
replica announces it is in UNISYNC mode, press the
UNISYNC button on the replica device once more –
the replica will announce it is using UNISYNC audio.
The primary speaker will show a solid blue light while
replicas will show a flashing red and blue light.
To exit UNISYNC mode, press the UNISYNC button
until you hear UNISYNC disabled.*
Press and hold the UNISYNC button for 6 seconds
to reset the UNISYNC function.**
*If UNISYNC is disabled, Soundwave will disconnect from but
remember the replicas connected to it.
**Resetting UNISYNC will enable Soundwave to 'forget' all
replica devices and Bluetooth connections.
8
4. OPERATING CONTROLS
POWERBANK
TM
Soundwave comes with a USB-A output port, which
is capable of supplying up to 5V⎓2A (10W).
Whilst charging another device, the LED battery
indicator lights will flash. The number of lights
flashing will indicate how much charge is remaining
in the speaker's powerbank.
MULTIPOINT CONNECTION
Multipoint is a feature that allows Soundwave to
connect to two Bluetooth devices at once. This
means that you can listen to music from one device,
whilst still hearing notifications and receiving calls
from another device.
To setup Multipoint:
1. Connect your first Bluetooth device.
2. Hold down the UNISYNC button for 2 seconds
to disconnect Bluetooth.
3. Connect your second Bluetooth device.
4. Hold down the power button for 2 seconds
and turn off Soundwave.
5. Hold down the power button for 2 seconds
and turn on Soundwave.
Soundwave will announce "Bluetooth connected"
twice. Soundwave will play audio from the last device
it receives a command from, but it will treat the
device with calls and notifications as priority.
9