Specifications; Important Safety Info - Sprout SOUNDWAVE Product Manual

5.

SPECIFICATIONS

• Dimensions: 155x 110x 80mm
• Unit weight: 645g
• USB-C input: 5V⎓3A (15W)
• USB-A output: 5V⎓2A (10W)
• Battery capacity: 5200mAh
• Playtime: Up to 14 hours at 50% volume
• Driver size: 2x 47mm
• Frequency response: 20-22kHz
• Power output: 12W
• Total max power output: 24W
• IP rating: 56 Splashproof
(when port cover is closed)
• Bluetooth version: 5.3
• Aux input: 3.5mm
10
6.

IMPORTANT SAFETY INFO

1. Do not attempt to charge Soundwave when it is
wet or you suspect water has seeped into the
device. Thoroughly dry Soundwave and make
sure all connections are dry before attempting to
remove the port cover. Failure to do so may result
in electrical shock, fire or electrical damage to
Soundwave and may void the warranty.
2. Do not use Soundwave near an open fire,
heat source or excessive heat.
3. Do not disassemble this device or attempt to
modify in any manner.
4. Sound levels should be appropriate to your
environment and comply with all local regulations.
5. Ensure that you can hear and are aware of
any potential hazards around you when you are
enjoying your Soundwave speaker.
All Sprout products go through thorough quality
assurance inspections. If you find that your device
is excessively hot, is emitting odour, is deformed,
abraded, cut or is experiencing or demonstrating an
abnormal phenomenon, immediately stop all product
use and contact Sprout.
11