Quick Start Guide - Sprout Nomad Trek+ Instruction Manual

03.

Quick Start Guide

Charging Your Nomad Trek+:
1. Connect the USB Type-C cable into the 'USB-C
input' and connect the USB-A end of cable into
a power source*.
2. The battery LED indicator will flash from one to
four LEDs to indicate Nomad Trek+ is charging.
The lights will stop flashing once Nomad Trek+
is fully charged**.
4 white lights on:
3 white lights on:
2 white lights on:
1 white light on:
The speaker will announce "Low Battery" when the
battery level reaches 10%.
The speaker will announce "Low Battery" when the
battery level reaches 10%.
*Power source options include USB connection to
an AC power adapter, a car charger or computer/
notebook USB connection.
**Full charge will take approximately 1.5 hours.
Battery 100%
Battery 75%
Battery 50%
Battery requires recharge
07