Page 1
CORA ™ 1173 CONSOLE TABLE INSTRUCTION MANUAL LET’S GET STARTED. DESIGN MATTHEW WEATHERLY...
Page 2
Congratulations on the purchase of your Cora Console Table from BDI. Your console table has been designed to provide a lifetime of enjoyment. This manual will provide assembly instructions and other helpful information to ensure you get the most out of your product.
Page 3
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface, such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
Page 4
SCREW – H1 Attach the 4 Shelf Supports (C4) to the 2 Legs (C3) using 4 Screws (H1) in the orientation shown. Tighten screws with Hex Wrench (T1). SCREW – H2 Partially thread screws into these holes 4 | BDIUSA.COM CORA 1173...
Page 5
STEP 3. ATTACH LEGS TO BASE ASSEMBLY Slide the Screws in the Legs (C3) into the slots in the Connection Plates (C1). Thread the remaining 4 Screws (H2) into the holes in the Legs (C3). Tighten all screws with HEX WRENCH – T1 Hex Wrench (T1).
Page 6
Shelf (C5) to the Shelf Supports (C4) using HEX WRENCH – T1 8 Screws (H3). Do not tighten until all screws are installed. When all screws have been installed, tighten with Hex Wrench (T1). SCREW – H3 6 | BDIUSA.COM CORA 1173...
Page 7
STEP 5. ATTACH BASE ASSEMBLY TO CONSOLE TABLE CASE ASSEMBLY Attach the Base Assembly to the Console Table Case (C6) with 8 Screws (H4). Tighten with Hex Wrench (T1). HEX WRENCH – T1 SCREW – H4 STEP 6. INSTALL DRAWER PULLS ASSEMBLY With the help from another person, carefully flip NOT INCLUDED...
Page 8
PRODUCT REGISTRATION Registering your new BDI product allows us to send you important product updates, service information, and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws.
Need help?
Do you have a question about the CORA 1173 and is the answer not in the manual?
Questions and answers