BDI CODE 7376 Assembly Instructions Manual

Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Code Console is designed for indoor use on level floors.
Clean painted surfaces and steel parts with a damp cloth.
Code is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Code & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 05.29.2019 V2
CODE 7376
™
CONSOLE
bdiusa.com
customerservice@bdiusa.com
T1 Hex Wrench x 1
H1 1/4-20 x 10 mm
Flat-head Screw x 8
H2 1/4-20 x 12mm
Screw x 8
H4 #6 x 12 mm
Wood Screw x 8
H3 1/4-20 x 87 mm
Screw x 6
H5 Door Pull x 4
C1 Cabinet x 1
A1 Base Rails x 2
A2 End Plates x 2
A3 Leg x 2
C2 Ventilated Drop-in
Panel x 2
C3 Center Shelf x 1
C4 Side Shelf x 2
Tool Required:
Phillips Screwdriver