BDI COSMO 5720 Manual

COSMO
BAR
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Cosmo Bar is designed for indoor use on level floors.
Clean wood, metal, and porcelain surfaces with a damp cloth.
Cosmo is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
H3 Wall Anchor
Strap x 2
H4 Rechargeable
Strip Light
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Cosmo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in China. 12.05.2019 V3
5720
™
bdiusa.com
customerservice@bdiusa.com
T1 Hex Driver x 1
T2 Leveler Wrench x 1
H1 M6 x 12mm Screw
x 26
C5 Anti-skid Pad x 2
C6 Middle Drawer
Liner x 1
C7 Side Drawer
Liner x 2
A1 Cabinet x 1
C1 Base Frame x 2
C2 Top Connector Tube x 2
A2 Lower Shelf x 1
C3 Bottom Connector
Tube x 2
H5 Micro HDMI/USB
charge cord x 1
Tool Required:
Slotted Screwdriver