Mid-Tune Valve Cup Change (Optional) - SRAM RockShox SIDLuxe 2024+ Service Manual

M i d - T u n e V a l v e C u p C h a n g e ( O p t i o n a l )
To change from a 2P (two-position) to a 3P (three-position) damper To change from a 2P (two-position) to a 3P (three-position) damper
system, you must install a new valve cup and new lever or remote system, you must install a new valve cup and new lever or remote
cams. cams.
The 2P valve cup does not have any holes or shims. The 3P valve cup The 2P valve cup does not have any holes or shims. The 3P valve cup
has holes, shim(s), and a bolt. The 3P valve cup has an optional tune has holes, shim(s), and a bolt. The 3P valve cup has an optional tune
change. Consult the RockShox Spare Parts Catalog at change. Consult the RockShox Spare Parts Catalog at
www.sram.com/service for part numbers. www.sram.com/service for part numbers.
To change from a 2P to a 3P damper system, or vice versa, requires a
different valve cup and new lever or remote cams. See the
Remote Damper Change
1
3P Only: Loosen the Mid-Tune valve cup bolt. Remove the shim(s).
Install the appropriate number of shims for your desired tune. Install the
valve cup bolt and tighten.
Tune
3P M8
3P M5
3P M2
NOTI CE
section for installation.
Shim Size
3 x 11 x 0.15 / 3 x 11 x 0.15
3 x 11 x 0.15 / 3 x 6 x 0.15
3 x 11 x 0.15
Lever and
2P Valve Cup
14 mm socket / Piston Tool / 5 mm
M5 Tune
14 mm socket / Piston tool
3P Valve Cup
M8 Tune
M2 Tune
1.1 N.m (10 in-lb)

Mid-Tune Valve Cup Change (Optional)

5 mm
44