Maintenance And Disposal - Tekno Point ATHENA C200 User And Installation Manual

Maintenance and disposal

Before performing any maintenance on the unit, you should turn the unit off first and shut off the power.
A well-maintained heat pump could save your energy costs and make the unit durable, but must be done
by a qualified technician. Below are some tips for your reference to help your heat pump gives you
optimum performance.
1. Turn the power off when the unit is being maintained.
2. Do not use petrol, naphtha, dissolvent and any other chemicals on the unit, otherwise, it may damage
the surface. External heat pump parts can be wiped with a damp cloth and domestic cleaner.
3. Avoid leaning or putting objects on the device.
4. Keep dry and drafty round the unit. Clean heat exchangers regularly (usually once per 1~2 months) to
keep a good heat exchange efficiency.
5. If the unit will be shut down for a long time, you should drain the water in the pipe, turn the power off
and cover it with protective cover, check it roundly before you start it again.
6. It is advised to use the phosphoric acid whose temperature is about 50~60°C and consistency is 15% to
clean the heat exchanger of the unit. First start the circulation pump to clean it for 3 hours, and then flush it
with tap water for three times. Do not use any amictic detergent to clean the heat exchanger and the tank.
7. Change the installation place
If the customer wants to change the site, please contact with the dealer or the local Customer Service for
help.
This mark indicates that this product should not be disposed of with other household waste
across the EU. To avoid possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return the used device, use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmentally safe recycling.
80