Tekno Point ATHENA C200 User And Installation Manual page 62

Function button
1. In main menu, press
(1): Heating mode
The left side of the screen shows the set water temperature of buffer tank; The right side of the screen
shows the measured water temperature of buffer tank. Press
ture of buffer tank, the maximum water temperature can be set is 60°C.
(2): Cooling mode
The left side of the screen shows the set water temperature of buffer tank; The right side of the screen
shows the measured water temperature of buffer tank. Press
water temperature of buffer tank, the minimum water temperature can be set is 8°C.
(3): DHW mode
The left side of the screen shows the set DHW water temperature; The right side of the screen shows
the measured DHW water temperature. Press
the maximum DHW water temperature can be set is 55°C. DHW status
62
button to switch working mode. The units have 5 working modes as below:
Heating status
Cooling status
or
Heat pump status
or to adjust the set water tempera-
. Premere or
to adjust the set DHW water temperature,
to adjust the set