Parameters Settings - Tekno Point ATHENA C200 User And Installation Manual

E-Heater manual startup
To start manual electric heating manually, it is necessary, in the ON state, to press
simultaneously for 5 seconds to enter/exit forced electric heating.
The option will work only if the outdoor temperature threshold, set in parameter b13, is met.
Check background failure of protection 2
In On status, press
if there is no failure. Press
Restore factory settings
In ON status, press
after 10 seconds to save the setting, and turn on again after 10 seconds.

Parameters settings

Parameter changes may only be made by trained personnel authorised by the manufacturer.
1.In main menu, press
to set parameters. Press
2. In parameter setting menu, if there is no operation for 30 seconds, will automatically exit parameter setting
and back to main menu. Or press
Item Description
Water difference to start compressor in hea-
b01
ting mode
Water difference to start compressor in coo-
b02
ling mode
b03 Max. set temperature in heating mode
b04 Min. set temperature in heating mode
b05 Max. set temperature in cooling mode
b06 Min. set temperature in cooling mode
b07 Water temperature compensation
b08 Circulation running mode
b09 Circulation pump interval time
Inlet and outlet water temperature
b10
difference protection value
b11 Working mode
b12 Power lost memory function
66
button for 10 seconds to check background failure of protection 2. It displays "----"
button to back to main menu.
and button simultaneously for 3 seconds till there is sound "Di". Turn off
button for 3 seconds to enter parameter setting menu, press
button to save setting..
button to back to main menu.
Default
Unit Range
value
3 °C
3 °C
60 °C 20~60
15 °C 10~20
32 °C 20~60
8 °C
0 °C
2
5 min
13 °C
3
1
and buttons
or
Remark
0~15
0~15
7~20
-9~9
0: run 2 mins every
b09 mins
0~2 1: run as compressor
run
2: always run
0~99
5~40
0: heating
1: heating+DHW
2: heating+cooling
3: heating+cooling+-
0~1
DHW
After setting, it needs
to be powered off to
take effect.
0: off
0~1
1: on
button