Tekno Point ATHENA C200 User And Installation Manual page 65

25 Outdoor environment temperature
26 Buffer tank temperature
27 Temperature of after throttling
28 Inlet water temperature
29 Outlet water temperature
30 Suction temperature
31 Casecade switch selection
32 Cascade switch status
33 Status of water pump
Clock setting
1. In main menu, press
2. In clock setting menu, press
3. After the hour is set, press
4. After the minute is set, press
5. In clock setting menu, if there is no operation for 30 seconds, will automatically save clock setting and back
to main menu.
6. In clock setting menu, press
Timer setting
1. In main menu, press
2. In timer 1 setting, press
timer ON.
3. After the hour of timer ON is set, press
minute of timer ON..
4. After the minute of timer ON is set, press
setting as timer ON.
5. After the timer OFF is set, press
and OFF setting of timer 2. The setting is same as setting of timer 1.
6. In timer setting menu, press
7. In timer setting menu, if there is no operation for 30 seconds, will automatically save timer setting and back to
main menu.
8. In timer setting menu, press
Manual defrosting
In ON status, pressi
displace on the screen.
button for 10 seconds to enter clock setting menu.
, lbutton, the hour flashes, press
, button again, the minute flashes, press
button again to save the clock setting and back to main menu.
button to save clock setting and back to main menu..
button to enter timer 1 setting.
, button again, hour of timer ON flashes, press
, button again, the minute flashes, press
button again to save timer 1 ON and OFF setting. And enter timer ON
button to cancel the current setting of timer ON/OFF.
button to save timer setting and back to main menu.
and button simultaneously for 5 seconds to enter manual defrosting,
°C -30~105
°C -30~105
°C -30~105
°C -30~105
°C -30~105
°C -30~105
0: OFF; 1: ON
0: OFF; 1: ON
0:OFF; 1: ON
button again, button again to enter hour setting of timer OFF,
or to set the hour.
or to set the minute.
or to set the hour of
or to set the
65