Tekno Point ATHENA C200 User And Installation Manual page 63

(4): heating + DHW mode (DHW priority)
When the unit is in heating status,
water temperature of buffer tank; The right side of the screen shows the measured water
temperature of buffer tank. Press
the maximum water temperature can be set is 60°C.
When the unit is in DHW status,
DHW water temperature; The right side of the screen shows the measured DHW water temperature.
Press; to adjust the set DHW water temperature, the maximum DHW water temperature
can be set is 55°C.
perature can be set is 55°C.
(5): Cooling + DHW (DHW priority)
When the unit is in cooling status,,
water temperature of buffer tank; The right side of the screen shows the measured water temperature
of buffer tank. Press
water temperature can be set is 8°C. When the unit is in DHW status,,
of the screen shows the set
DHW water temperature; The right side of the screen shows the measured DHW water temperature.
Press or to adjust the set DHW water temperature, the maximum DHW water temperature
can be set is 55°C.
flash on the screen, the left side of the screen shows the set
or to adjust the set water temperature of buffer tank,
flash on the screen, the left side of the screen shows the set
or to adjust the set DHW water temperature, the maximum DHW water tem-
Heating+ DHW status
flash on the screen, the left side of the screen shows the set
or to adjust the set water temperature of buffer tank, the minimum
Cooling+ DHW status
flash on the screen, the left side
63