Table of Contents
Advertisement
BEFORE OPERATING, ADJUST THE POSITION OF THESE SWITCHES
TWO VOLTAGE SELECTOR SWITCHES
Only muttivoltage models are provided with these switches. U.S.,
Canadian, European, U.K. and Australian models are not provided with
these switches.
Mains voltages in Saudi Arabia are
127 V and 220 V only. Never use
this model with 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel. Before your
model is shipped from the factory, these switches are set to the power
requirements of the destination. Check that they are set properly before
plugging the power cord into the household wail socket. If the voltage
is not properly set or if you move
to an area where the voltage
requirements differ, adjust the selector switches as follows.
1. Use a medium-size screwdriver.
.
2. First, insert a screwdriver in the groove of the voltage selector at
the right, and adjust so that the tip of the groove points to the voltage
value of your area:
3. Next, insert a screwdriver in the groove of the voltage selector at
the left and adjust until the voltage is the same as at the right.
TWO VOLTAGE SELECTORS
220V
v10v
ee
110V
Ui
Sao
20V-127V
29N
Medium-size
screwdriver
n
5
5
4 rr
a
8
z
8
>
NOTE:
i CAUTION: TWO VOLTAGE SELECTORS
0"
CHANNEL STEP/FM DE-EMPHASIS SWITCH
(Not available on U.S. and Canadian models)
The unit has been factory-preset to the channel allocation and de-
emphasis value for the area in which it is to be sold. If these values are
set incorrectly, the frequency display may stop at the wrong frequency,
or sound may be distorted, resulting in an inability to reproduce reception
signals at their proper sound quality. For this reason, be sure to confirm
that the values are set correctly before first using the unit.
[100kHz/10kHz/75ys] position:
Set to this position for areas with an FM reception step of 100kHz, AM
10kHz, and de-emphasis 75ys.
{50kHz/9kHz/50xs] position:
Set to this position, for areas with an FM reception step of 50kHz, AM
9kHz, and de-emphasis 50uzs.
NOTE:
When unsure about the channel allocation and de-emphasis values for
your area, consult your dealer for correct information.
CHANNEL STEP
'FM DE-EMPHASIS
SOkHz/50uS
f {_100kHz/75zS
~a FM
9kHz
1OkHz
—a AM
x
ie
ce
220V
240V
Both switches must be in the same switch
setting; otherwise, unit can be damaged.
FEATURES
¢ DOLBY
PRO
LOGIC
SURROUND
performed
by a
Digital Signal Processor (DSP).
© DSP provides five Sound Field Control (SFC) simulated
surround settings.
® Multi-Room & Source
Using this unit in combination with the optional MR-100 Multi-Room
System Remote Control Sensor Unit lets you enjoy different sources
in different rooms at the same time.
© Enhancer, Split screen function
The built-in detail-type enhancer is beneficial when making copies of
VCR tapes. By using the split-screen function, you can simultaneously
view the enhanced and origina! (non-enhanced) images. In this way you
can select the optimum settings for enhancing the image.
® Input attenuator
Depending on the component or source, input level to this unit may be
too high, possibly resulting in a distorted sound during playback. For
this reason, there's a built-in attenuator to decrease the level, thereby
eliminating distortion.
4
<ARB1332>
¢ Auto source control function
This function lets you store your usual receiver settings in memory, and
cail them up simply by pressing the call up button. (Up to two patterns
can be memorized.)
© Confirm function (remote control operation)
This function indicates receiver settings in the display section st the
touch of a remote control button.
¢ Equipped
with the JOG
dial, designed
for easier
operation.
* Digital Simulated Stereo System (DSSS)
© Audio/Video programmable remote control unit.
Advertisement
Table of Contents
